VAMO V2 VV/VW MOD KIT - CHROME

319,20DKK

COMPLETE STARTER KIT WITH BATTERIES & CHARGER
One of the better value versions of Variable Wattage (VW) and Variable Voltage (VV) device - Now with improved hotspring, better finish and metal buttons.
 
** 1 PCS. MULTI CHARGER
** 1 PCS. 18650 (2000 MAH)
** 1 PCS. 18350 (900 MAH)

Model: MOD-VAMO
Weight: 0.400
Availability: Out of stock
  Get notified when back in stock
FREE shipping!

This device is getting good reviews for being one of the better value versions of Variable Wattage (VW) and Variable Voltage (VV) device and performs really very good.

It should work well with almost any atomizers with 510 and eGo connections and in variable wattage mode it should adjust automatically to suit most resistance atomizers (above 1.2 ohms). The Vamo has a 1.2 ohm cut off feature.

The VAMO is an inexpensive mod with an impressive list of features.

The specifications of chrome Vamo VV/VW Mod Body V2 :
•Metal buttons
•Variable Volt: 3~6.0V,
•Variable Watt: 3~15W.
•Thread: 510/eGo
•PWM (Pulse Width Modulation) output, up to 5 amps
•5 click on/off
•Multiple battery options (1 x 18650, 1 x 18350 or 2 x 18350)
•Reverse and short protection
•Low resistance and low battery warning

Box contents:
1 pcs. Vamo VV/VW Mod Body V2
1 pcs. ICR 18350 - 3,7 V - 900 mAh
1 pcs. ICR18650 - 3,7 V - 2000 mAh
1 pcs. 510-EGO Adapter for mouting 510/EGO threading atomizers.
1 ocs. 240V Batteri Oplader.

When fully assembled the Vamo mod can accommodate one 18650 or two 18350 batteries. By removing one body section, a single 18350 battery may be used. Protected batteries are not required.

How to use chrome Vamo VV/VW Mod Body V2:

Turn On or Off:
Press the Power (large) button 5 times within 2 seconds.

Switch between VV and VW:
Press and hold + and - buttons for 3 seconds (v for volts, w for Watts).

Voltage adjust:
Tap the + or - buttons to raise or lower output voltage (in .1 volt increments).

Wattage adjust:
Tap the + or - buttons to raise or lower output wattage (in .5 watt increments).

Resistance check:
With an atomiser or cartomiser installed on unit, press and hold the + button for 2 seconds. Atomiser resistance is displayed in ohms.

Battery voltage check:
Press and hold the - button for 2 secs to check actual battery voltage

IMPORTANT
The Vamo can display output voltage and wattage as an Average or as RMS (Root Mean Square). RMS is the actual and true output and is the one to use.

Press and hold the + button for 10 secs. If no2 is shown then the output is already set to RMS, no further action is required. If no1 is shown, release the button and press again for 10 secs until the display shows no2. This setting should not alter after a battery change, however if the vape feels warmer than expected please re-check setting.

Error codes:
LO-Ω : Atomiser resistance is too low (below 1.3 ohm).
LO-v : Atomiser shorted

Display will flash when battery needs replacing/recharging (approx 3.4v).

Voltage or wattage level resets when battery is removed, the mode does not.

Usage of eGo style cartomisers/clearomisers:
The Vamo has a recessed atomiser fitting with a large opening to accommodate the eGo skirt. Most popular atomisers and cartomisers will fit, however if you use a wide skirted unit (eg: Kanger T2 or T3 clearomizer) you will need to fit a 510-EGO adaptor.
 

This device is getting good reviews for being one of the better value versions of Variable Wattage (VW) and Variable Voltage (VV) device and performs really very good.

** This is the latest batch - improved model and has much better finish in top threading, better contact pole, improved hotspring and - due to many request delivered with metal buttons. **


 It should work well with almost any atomizers with 510 and eGo connections and in variable wattage mode it should adjust automatically to suit most resistance atomizers (above 1.2 ohms). The Vamo has a 1.2 ohm cut off feature.
 
The VAMO is an inexpensive mod with an impressive list of features.
 
The specifications of chrome Vamo VV/VW Mod Body V2 :
•Metal buttons
•Variable Volt: 3~6.0V,
•Variable Watt: 3~15W. 
•Thread: 510/eGo
•PWM (Pulse Width Modulation) output, up to 5 amps
•5 click on/off
•Multiple battery options (1 x 18650, 1 x 18350 or 2 x 18350)
•Reverse and short protection
•Low resistance and low battery warning
 
Box contents:
1 pcs. Vamo VV/VW Mod Body V2
1 pcs. ICR 18350 - 3,7 V - 900 mAh
1 pcs. ICR18650 - 3,7 V - 2000 mAh
1 pcs. 510-EGO Adapter for mouting 510/EGO threading atomizers.
1 ocs. 240V Batteri Oplader.
 
When fully assembled the Vamo mod can accommodate one 18650 or two 18350 batteries. By removing one body section, a single 18350 battery may be used. Protected batteries are not required.
 
How to use chrome Vamo VV/VW Mod Body V2:

Turn On or Off: 
Press the Power (large) button 5 times within 2 seconds.
 
Switch between VV and VW: 
Press and hold + and - buttons for 3 seconds (v for volts, w for Watts).
  
Voltage adjust:
Tap the + or - buttons to raise or lower output voltage (in .1 volt increments).
  
Wattage adjust:
Tap the + or - buttons to raise or lower output wattage (in .5 watt increments).
 
Resistance check:
With an atomiser or cartomiser installed on unit, press and hold the + button for 2 seconds. Atomiser resistance is displayed in ohms.
 
Battery voltage check:
Press and hold the - button for 2 secs to check actual battery voltage
 
IMPORTANT
The Vamo can display output voltage and wattage as an Average or as RMS (Root Mean Square). RMS is the actual and true output and is the one to use.
 
Press and hold the + button for 10 secs. If  no2 is shown then the output is already set to RMS, no further action is required. If no1 is shown, release the button and press again for 10 secs until the display shows no2. This setting should not alter after a battery change, however if the vape feels warmer than expected please re-check setting. 
 
Error codes:
LO-Ω : Atomiser resistance is too low (below 1.3 ohm).
LO-v : Atomiser shorted 
 
Display will flash when battery needs replacing/recharging (approx 3.4v).
 
Voltage or wattage level resets when battery is removed, the mode does not.
 
Usage of eGo style cartomisers/clearomisers: 
The Vamo has a recessed atomiser fitting with a large opening to accommodate the eGo skirt. Most popular atomisers and cartomisers will fit, however if you use a wide skirted unit (eg: Kanger T2 or T3 clearomizer) you will need to fit a 510-EGO adaptor.
 

Lasse Havelund 02/24/2013

Selve Vamoen kan jeg kun tale enormt varmt om. Røret er udført i forkromet messing, og har en god vægt i hånden, og føles generelt meget solid. Langt det meste af mit 510-maskineret udstyr passer perfekt (som forventet), men husk dog at Kangar T2 og Kangar T3-clearomizere (o.l.) ikke passer på enheden. Vivi Novaer (+mini) passer dog ganske fint. Sættet ankommer i en fin kasse, og der medhører 2 styks batterier. Ét styks 18350 og ét styks 18650, såvel som en lader. Her synes jeg dog, at skruen ryger. For det første, så er batterierne fremstillet af et firma i Kina called D.K.L Battrey Company (ja, Battrey). I de fleste tilfælde vil jeg stærkt fraråde at benytte batterier som ikke er fra f.eks. EFest eller Panasonic, og selvom man snildt kan køre på disse et par dage, så vil jeg afgjort fraråde det. Selve laderen er tydeligvis af meget billig kvalitet, og jeg har flere gange hørt, at den kan have en tendens til at overoplade batterier, hvilket kan resultere i sprækkede og ødelagte batterier, og i værste fald, eksplosionsfare (en fare som eksisterer ved ALLE batterier, men i højere grad på nogle som disse). Kittet er ganske OK. Selve VAMO-enheden er fantastisk, men resten af kittet får ikke mange point.

Add review: