By: KSD

VAMO V7 MOD 30W - VV/WW (SS)

239,20DKK
319,20DKK
You save: 80,00DKK

VAMO 7 is the of the Vamo Series. VAMO 7 is One of the absolutly best value subohm mods VV/VW on the market.
It has a polished stainless steel body without any engravings . Besides from its many features it's really robust and stabile - and easy to use.

Model: MOD-VAMO7
Weight: 0.300
Availability: Out of stock
  Get notified when back in stock
FREE shipping!

VAMO 7 BATTERY MOD (30W) - VARIABlE VOLTS OG WATTAGE

Superflot rustfri stål poleret mod, nyeste version af de oprindelig Vamo, spækket med funktioner, features og justeringsmuligheder. Kan benyttes med både 18350 og 18650 batterier.

Highlights:
3-6 Volt, 5-30 Watt, 0.5-1.8ohm

Mod virker med alle atomizers med 510 og ego gevind og benyttes variable watt indstillingen justerer mod'et selv output så det passer til de fleste atomizer modstande over 0.5ohm. Vamo har en cut-off ohm funktioner, der slår fra ved lavere ohms.

VAMO er et godt og prisbilligt mod med en imponerende liste af funktioner:

VAMO V6 - Contents of box:

1 pc. VAMO V7 MOD (Stainless Steel - Polished) with OLED display
1 pc. Top-ring (can be dismounted) for use with ie. T2/T3 (atomizers with skirts)
1 pc. Top 510-Adapter with USB outlet/port. Vamo can be used as powerbank (Ekstern battery)
1 pc. 18650 battery extension
1 pc. 18350 battery extension
1 pc. UK Usermanual

NB! No batteries, atomizer og charger are included - and should be purchased seperately.

Specifications for Vamo VV/VW MOD

- Variable Volt: 3~6.0V, (Trin af 0,5V)
- Variable Watt: 3~50W. (Trin af 0,1V
- Gevind: 510/EGO
- PWM (Pulse Width Modulation) output, op til 5A
- 5 Klik tænd/sluk
- Kan bruges med flere batterkonfigurationer: f.eks 1x 18650, 1x 18350 or 2x 18350
- Pol-beskyttelse og kortslutningsbeskyttelse
- Advarsel ved for lav ogm eller lav batteri

Denne varer er kun selv Vamo VV/VW Mod Body V2 uden batteri, atomizer, adapter eller lader.

Fuld samlet kan VAMO bruges sammen med 1 stk. 18650 eller 2 stk.18350 ved at fjerne nederst del af kroppen på mod'et kan man monterer 1 enketlt 18350.
VAMO MOD kræver ikke beskyttede batterier.

How to use chrome Vamo VV/VW Mod Body V6:

Turn On or Off:
Press the Power (large) button 5 times within 2 seconds.

Switch between VV and VW:
Press and hold + and - buttons for 3 seconds (v for volts, w for Watts).

Voltage adjust:
Tap the + or - buttons to raise or lower output voltage (in .1 volt increments).

Wattage adjust:
Tap the + or - buttons to raise or lower output wattage (in .5 watt increments).

Resistance check:
With an atomiser or cartomiser installed on unit, press and hold the + button for 2 seconds. Atomiser resistance is displayed in ohms.

Battery voltage check:
Press and hold the - button for 2 secs to check actual battery voltage

IMPORTANT
The Vamo can display output voltage and wattage as an Average or as RMS (Root Mean Square). RMS is the actual and true output and is the one to use.

Press and hold the + button for 10 secs. If no2 is shown then the output is already set to RMS, no further action is required. If no1 is shown, release the button and press again for 10 secs until the display shows no2. This setting should not alter after a battery change, however if the vape feels warmer than expected please re-check setting.

Error codes:
LO-Ω : Atomiser resistance is too low (below 1.5 ohm).
LO-v : Atomiser shorted

Display will flash when battery needs replacing/recharging (approx 3.4v).

Voltage or wattage level resets when battery is removed, the mode does not.

Usage of eGo style cartomisers/clearomisers:
The Vamo has a recessed atomiser fitting with a large opening to accommodate the eGo skirt. Most popular atomisers and cartomisers will fit, however if you use a wide skirted unit (eg: Kanger T2 or T3 clearomizer) you will need to remove the beayty top ring.
 

There is no reviews yet. Be the first to write us your opinion

Add review: